Product image is representative; revision or series may vary. Contact us to request a specific version.
Schneider Electric BLRCH208A250B40
The Schneider Electric BLRCH208A250B40 is a VarPlusCan HDuty power factor correction capacitor, part of the Schneider Electric General Automation range. It offers a 415 V AC supply, a 50 Hz supply frequency and IP20 protection.
1-Year Warranty
Automation parts backed by our complimentary 1-year warranty.
Fast Shipping
Fast domestic and international shipping.
Payment Flexibility
Major cards, wire transfer, PO and net terms for businesses.
Repairs & Exchanges
In-house repairs and exchanges across all automation products.
Reseller Options
Drop-shipping, blind shipping and account shipping available.
Not an authorized distributor: PLC Supply is not an authorized distributor for the manufacturers or trademarks listed, and the manufacturer's warranty does not apply. All products come with PLC Supply's 1-year warranty.
Technical specifications for BLRCH208A250B40
| Supply voltage | 415 V AC |
|---|---|
| Frequency | 50 Hz |
| Degree of protection | IP20 |
Description
VarPlusCan HDuty power factor correction capacitor, rated output 20.8 kVAr 50 Hz / 25 kVAr 60 Hz nominal voltage 380 415 V AC dielectric metallized polypropylene film with Zn/Al alloy dry PUR resin impregnation no PCBs terminal type ClampTite for heavy duty operation with higher non linear loads harmonic tolerance 20 continuous overcurrent capacity 1.8 x In maximum switching operations per year 7000 service life 130,000 h protection rating IP20 standards IEC 60831 1 and IEC 60831 2.
Repairs
We repair and refurbish Schneider Electric General Automation units in-house with bench testing and a warranty on every repair. Start a repair.
Frequently asked questions
- What is the Schneider Electric BLRCH208A250B40?
- The BLRCH208A250B40 is a Schneider Electric General Automation part, described by the manufacturer as: VarPlusCan HDuty power factor correction capacitor, rated output 20.8 kVAr 50 Hz / 25 kVAr 60 Hz nominal voltage 380 415 V AC dielectric metallized polypropylene film with Zn/Al alloy dry PUR resin impregnation no PCBs terminal type ClampTite for heavy duty operation with higher non linear loads harmonic tolerance 20 continuous overcurrent capacity 1.8 x In maximum switching operations per year 7000 service life 130,000 h protection rating IP20 standards IEC 60831 1 and IEC 60831 2. We supply it as surplus — new, refurbished or tested used depending on what is available for this part.
- How much does the Schneider Electric BLRCH208A250B40 cost?
- The BLRCH208A250B40 is listed at A$221.10 including GST. Send a quote request to confirm the price for your quantity and the lead time before you order.
- What condition is the BLRCH208A250B40 supplied in?
- We supply the Schneider Electric BLRCH208A250B40 as new. Every unit is bench-tested before it ships, whatever its condition, and the options and prices for this part are listed above.
- Does the BLRCH208A250B40 come with a warranty?
- Yes. The Schneider Electric BLRCH208A250B40 is covered by our 1-Year PLC Supply Warranty. We are an independent supplier, not an authorised Schneider Electric distributor, so that is our own warranty rather than the manufacturer's — and it applies to new, refurbished and tested used units alike.
Technical notes
Specifications and images are representative and may vary by revision or series. Confirm firmware and revision requirements with our specialists before ordering.
Related General Automation products
Schneider Electric
006920501
The Schneider Electric 006920501 is a STO Series outdoor temperature sensor, part of the Schneider Electric General Automation range. PLC Supply supplies the 006920501 new, refurbished or tested used. Ships Australia-wide and worldwide, bench-tested with a 1-year warranty.
In stock
Schneider Electric
AF1EA3
The Schneider Electric AF1EA3 is a set of 100 sliding nuts - M3, part of the Schneider Electric General Automation range. PLC Supply supplies the AF1EA3 new, refurbished or tested used. Ships Australia-wide and worldwide, bench-tested with a 1-year warranty.
In stock
Schneider Electric
006920301
The Schneider Electric 006920301 is a STP Series immersion temperature sensor, part of the Schneider Electric General Automation range. PLC Supply supplies the 006920301 new, refurbished or tested used. Ships Australia-wide and worldwide, bench-tested with a 1-year warranty.
In stock
Schneider Electric
IMT36184
The Schneider Electric IMT36184 is a Thorsman TET - grommet - grey - ISO M40 - diameter 20 to 26, part of the Schneider Electric General Automation range. PLC Supply supplies the IMT36184 new, refurbished or tested used. Ships Australia-wide and worldwide, bench-tested with a 1-year warranty.
In stock
Schneider Electric
C60HC206
The Schneider Electric C60HC206 is a C60HC 2P 6A C BSEN, part of the Schneider Electric General Automation range. It offers 6 A rated current. PLC Supply supplies the C60HC206 new, refurbished or tested used. Ships Australia-wide and worldwide, bench-tested with a 1-year warranty.
In stock
Schneider Electric
CCA783
The Schneider Electric CCA783 is a General Automation. PLC Supply supplies the CCA783 new, refurbished or tested used. Ships Australia-wide and worldwide, bench-tested with a 1-year warranty.
In stock
Schneider Electric
0062501504001
The Schneider Electric 0062501504001 is a Connector, part of the Schneider Electric General Automation range. PLC Supply supplies the 0062501504001 new, refurbished or tested used. Ships Australia-wide and worldwide, bench-tested with a 1-year warranty.
In stock
Schneider Electric
EVP2MX
The Schneider Electric EVP2MX is a 4G antenna for Evlink Smart Wallbox, part of the Schneider Electric General Automation range. PLC Supply supplies the EVP2MX new, refurbished or tested used. Ships Australia-wide and worldwide, bench-tested with a 1-year warranty.
In stock
Ready to order BLRCH208A250B40?
Get pricing, condition and lead time — usually within hours.
Request a quote