Product image is representative; revision or series may vary. Contact us to request a specific version.
Schneider Electric CA2DN22G7
The Schneider Electric CA2DN22G7 is a Control relay, part of the Schneider Electric General Automation range. It offers a 120 V AC supply, 10 A rated current, a 50/60 Hz supply frequency and 4 poles.
1-Year Warranty
Automation parts backed by our complimentary 1-year warranty.
Fast Shipping
Fast domestic and international shipping.
Payment Flexibility
Major cards, wire transfer, PO and net terms for businesses.
Repairs & Exchanges
In-house repairs and exchanges across all automation products.
Reseller Options
Drop-shipping, blind shipping and account shipping available.
Not an authorized distributor: PLC Supply is not an authorized distributor for the manufacturers or trademarks listed, and the manufacturer's warranty does not apply. All products come with PLC Supply's 1-year warranty.
Technical specifications for CA2DN22G7
| Supply voltage | 120 V AC |
|---|---|
| Rated current | 10 A |
| Frequency | 50/60 Hz |
| Number of poles | 4 |
| Mounting | DIN rail |
Description
Control relay, 4 pole 2 NO 2 NC , contact rating 10 A AC up to 690 V, coil 120 V AC 50/60 Hz G7 code , mounting 35 mm DIN rail clip or screw fixing, terminals screw clamp, ingress protection IP2X, operating temperature approx. 25 C to 50 C, approximate width 45 mm.
Repairs
We repair and refurbish Schneider Electric General Automation units in-house with bench testing and a warranty on every repair. Start a repair.
Frequently asked questions
- What is the Schneider Electric CA2DN22G7?
- The CA2DN22G7 is a Schneider Electric General Automation part, described by the manufacturer as: Control relay, 4 pole 2 NO 2 NC , contact rating 10 A AC up to 690 V, coil 120 V AC 50/60 Hz G7 code , mounting 35 mm DIN rail clip or screw fixing, terminals screw clamp, ingress protection IP2X, operating temperature approx. 25 C to 50 C, approximate width 45 mm. We supply it as surplus — new, refurbished or tested used depending on what is available for this part.
- What condition is the CA2DN22G7 supplied in?
- We supply the Schneider Electric CA2DN22G7 as new. Every unit is bench-tested before it ships, whatever its condition, and the options and prices for this part are listed above.
- Does the CA2DN22G7 come with a warranty?
- Yes. The Schneider Electric CA2DN22G7 is covered by our 1-Year PLC Supply Warranty. We are an independent supplier, not an authorised Schneider Electric distributor, so that is our own warranty rather than the manufacturer's — and it applies to new, refurbished and tested used units alike.
Technical notes
Specifications and images are representative and may vary by revision or series. Confirm firmware and revision requirements with our specialists before ordering.
Related General Automation products
Schneider Electric
AF1EA3
The Schneider Electric AF1EA3 is a set of 100 sliding nuts - M3, part of the Schneider Electric General Automation range. PLC Supply supplies the AF1EA3 new, refurbished or tested used. Ships Australia-wide and worldwide, bench-tested with a 1-year warranty.
In stock
Schneider Electric
006902321
The Schneider Electric 006902321 is a SHD Series SHD100 Model, part of the Schneider Electric General Automation range. PLC Supply supplies the 006902321 new, refurbished or tested used. Ships Australia-wide and worldwide, bench-tested with a 1-year warranty.
In stock
Schneider Electric
006920301
The Schneider Electric 006920301 is a STP Series immersion temperature sensor, part of the Schneider Electric General Automation range. PLC Supply supplies the 006920301 new, refurbished or tested used. Ships Australia-wide and worldwide, bench-tested with a 1-year warranty.
In stock
Schneider Electric
006920501
The Schneider Electric 006920501 is a STO Series outdoor temperature sensor, part of the Schneider Electric General Automation range. PLC Supply supplies the 006920501 new, refurbished or tested used. Ships Australia-wide and worldwide, bench-tested with a 1-year warranty.
In stock
Schneider Electric
EVP2MX
The Schneider Electric EVP2MX is a 4G antenna for Evlink Smart Wallbox, part of the Schneider Electric General Automation range. PLC Supply supplies the EVP2MX new, refurbished or tested used. Ships Australia-wide and worldwide, bench-tested with a 1-year warranty.
In stock
Schneider Electric
004602800
The Schneider Electric 004602800 is a room temperature sensor - LCD - bypass, part of the Schneider Electric General Automation range. PLC Supply supplies the 004602800 new, refurbished or tested used. Ships Australia-wide and worldwide, bench-tested with a 1-year warranty.
In stock
Schneider Electric
0062501504001
The Schneider Electric 0062501504001 is a Connector, part of the Schneider Electric General Automation range. PLC Supply supplies the 0062501504001 new, refurbished or tested used. Ships Australia-wide and worldwide, bench-tested with a 1-year warranty.
In stock
Schneider Electric
004701070 Schneider Electric - SPD910-500PA
The Schneider Electric 004701070 is a SPD910 - pressure switch sensor - 50...500 Pa, part of the Schneider Electric General Automation range. PLC Supply supplies the 004701070 new, refurbished or tested used. Ships Australia-wide and worldwide, bench-tested with a 1-year warranty.
In stock
Ready to order CA2DN22G7?
Get pricing, condition and lead time — usually within hours.
Request a quote