Product image is representative; revision or series may vary. Contact us to request a specific version.
ABB 1SCA113652R1001 OTM1250E3CM110V
The ABB 1SCA113652R1001 is a Motorized change over C/O switch, part of the ABB General Automation range. PLC Supply supplies the 1SCA113652R1001 new, refurbished or tested used. Ships Australia-wide and worldwide, bench-tested with a 1-year warranty.
1-Year Warranty
Automation parts backed by our complimentary 1-year warranty.
Automation Specialists
Talk to people who work with this hardware every day and get the right part, not a guess.
Payment Flexibility
Major cards, wire transfer, PO and net terms for businesses.
Repairs & Exchanges
In-house repairs and exchanges across all automation products.
Reseller Options
Drop-shipping, blind shipping and account shipping available.
Not an authorized distributor: PLC Supply is not an authorized distributor for the manufacturers or trademarks listed, and the manufacturer's warranty does not apply. All products come with PLC Supply's 1-year warranty.
Description
Motorized change over C/O switch, 3 pole, rated permanent current 1250 A, rated operational voltage up to 1000 V typical application 690 V AC , rated short time withstand current 50 kA, switching power AC 23 at 400 V 710 kW. Motor control voltage 110 125 V AC/DC. Open change over operation I 0 II . Includes handle for manual operation, bolt kit with nuts and washers for terminals and male connectors for control circuits. Suitable for use as main and maintenance switch meets IEC 60947 3 / IEC 60947 6 1 requirements.
Repairs
We repair and refurbish ABB General Automation units in-house with bench testing and a warranty on every repair. Start a repair.
Frequently asked questions
- What is the ABB 1SCA113652R1001?
- The 1SCA113652R1001 is an ABB General Automation part, described by the manufacturer as: Motorized change over C/O switch, 3 pole, rated permanent current 1250 A, rated operational voltage up to 1000 V typical application 690 V AC , rated short time withstand current 50 kA, switching power AC 23 at 400 V 710 kW. Motor control voltage 110 125 V AC/DC. Open change over operation I 0 II . Includes handle for manual operation, bolt kit with nuts and washers for terminals and male connectors for control circuits. Suitable for use as main and maintenance switch meets IEC 60947 3 / IEC 60947 6 1 requirements. We supply it as surplus — new, refurbished or tested used depending on what is available for this part.
- What condition is the 1SCA113652R1001 supplied in?
- We supply the ABB 1SCA113652R1001 as new. Every unit is bench-tested before it ships, whatever its condition, and the options and prices for this part are listed above.
- Does the 1SCA113652R1001 come with a warranty?
- Yes. The ABB 1SCA113652R1001 is covered by our 1-Year PLC Supply Warranty. We are an independent supplier, not an authorised ABB distributor, so that is our own warranty rather than the manufacturer's — and it applies to new, refurbished and tested used units alike.
Technical notes
Specifications and images are representative and may vary by revision or series. Confirm firmware and revision requirements with our specialists before ordering.
Related General Automation products
ABB
00-9334 ABB
The ABB 00-9334 is an AC capacitor for NW24060x1, part of the ABB General Automation range. PLC Supply supplies the 00-9334 new, refurbished or tested used. Ships Australia-wide and worldwide, bench-tested with a 1-year warranty.
Available to order
ABB
0-48664-2 ABB
The ABB 0-48664-2 is a Voltage transducer with 10SCREW terminal connection, part of the ABB General Automation range. PLC Supply supplies the 0-48664-2 new, refurbished or tested used. Ships Australia-wide and worldwide, bench-tested with a 1-year warranty.
Available to order
ABB
0-56942-1 ABB
The ABB 0-56942-1 is a REGULATOR power circuit board, part of the ABB General Automation range. PLC Supply supplies the 0-56942-1 new, refurbished or tested used. Ships Australia-wide and worldwide, bench-tested with a 1-year warranty.
Available to order
ABB
0.040.010.00 ABB
The ABB 0.040.010.00 is an Analog signal converter, part of the ABB General Automation range. PLC Supply supplies the 0.040.010.00 new, refurbished or tested used. Ships Australia-wide and worldwide, bench-tested with a 1-year warranty.
Available to order
ABB
00055 ABB - M000550000
The ABB 00055 is a Cover with CLIPS for box D.65 MM, part of the ABB General Automation range. PLC Supply supplies the 00055 new, refurbished or tested used. Ships Australia-wide and worldwide, bench-tested with a 1-year warranty.
Available to order
ABB
00056 ABB - M000560000
The ABB 00056 is a Cover with CLIPS for box D.85 MM, part of the ABB General Automation range. PLC Supply supplies the 00056 new, refurbished or tested used. Ships Australia-wide and worldwide, bench-tested with a 1-year warranty.
Available to order
ABB
05185 ABB - M051850000
The ABB 05185 is a WIRING duct PVC 40X80 4/6, part of the ABB General Automation range. PLC Supply supplies the 05185 new, refurbished or tested used. Ships Australia-wide and worldwide, bench-tested with a 1-year warranty.
Available to order
ABB
1SDA100423R1 ABB - XT5S 400 Ekip Dip LS/I In=320 3p F F
The ABB 1SDA100423R1 is a XT5S 400 Ekip Dip LS/I In=320 3p F F, part of the ABB General Automation range. PLC Supply supplies the 1SDA100423R1 new, refurbished or tested used. Ships Australia-wide and worldwide, bench-tested with a 1-year warranty.
Available to order
Ready to order 1SCA113652R1001?
Get pricing, condition and lead time — usually within hours.
Request a quote