Product image is representative; revision or series may vary. Contact us to request a specific version.
Schneider Electric LX1G3QKUEN
The Schneider Electric LX1G3QKUEN is a Control module LX1G for TeSys Giga contactor LC1G115 225, part of the Schneider Electric Modules range. It offers a 250 V AC/DC supply, 3 poles and IP20 protection.
1-Year Warranty
Automation parts backed by our complimentary 1-year warranty.
Fast Shipping
Fast domestic and international shipping.
Payment Flexibility
Major cards, wire transfer, PO and net terms for businesses.
Repairs & Exchanges
In-house repairs and exchanges across all automation products.
Reseller Options
Drop-shipping, blind shipping and account shipping available.
Not an authorized distributor: PLC Supply is not an authorized distributor for the manufacturers or trademarks listed, and the manufacturer's warranty does not apply. All products come with PLC Supply's 1-year warranty.
Technical specifications for LX1G3QKUEN
| Product family | TESYS |
|---|---|
| Supply voltage | 250 V AC/DC |
| Degree of protection | IP20 |
| Number of poles | 3 |
Description
Control module LX1G for TeSys Giga contactor LC1G115 225, control voltage 100 250 V AC/DC, 3 pole built in bidirectional peak limiting coil inrush power 485 VA 240 V AC , hold in consumption 9.4 VA 240 V AC operating time 40 55 ms closing, 20 35 ms opening mechanical durability 5 million cycles maximum operating rate 600 cycles/min at 60 C IP20 push in control terminals dimensions H 144.5 mm, W 105.7 mm, D 94.0 mm.
Repairs
We repair and refurbish Schneider Electric Modules units in-house with bench testing and a warranty on every repair. Start a repair.
Frequently asked questions
- What is the Schneider Electric LX1G3QKUEN?
- The LX1G3QKUEN is a Schneider Electric Modules part, described by the manufacturer as: Control module LX1G for TeSys Giga contactor LC1G115 225, control voltage 100 250 V AC/DC, 3 pole built in bidirectional peak limiting coil inrush power 485 VA 240 V AC , hold in consumption 9.4 VA 240 V AC operating time 40 55 ms closing, 20 35 ms opening mechanical durability 5 million cycles maximum operating rate 600 cycles/min at 60 C IP20 push in control terminals dimensions H 144.5 mm, W 105.7 mm, D 94.0 mm. We supply it as surplus — new, refurbished or tested used depending on what is available for this part.
- How much does the Schneider Electric LX1G3QKUEN cost?
- The LX1G3QKUEN is listed at A$535.26 including GST. Send a quote request to confirm the price for your quantity and the lead time before you order.
- What condition is the LX1G3QKUEN supplied in?
- We supply the Schneider Electric LX1G3QKUEN as new. Every unit is bench-tested before it ships, whatever its condition, and the options and prices for this part are listed above.
- Does the LX1G3QKUEN come with a warranty?
- Yes. The Schneider Electric LX1G3QKUEN is covered by our 1-Year PLC Supply Warranty. We are an independent supplier, not an authorised Schneider Electric distributor, so that is our own warranty rather than the manufacturer's — and it applies to new, refurbished and tested used units alike.
Technical notes
Specifications and images are representative and may vary by revision or series. Confirm firmware and revision requirements with our specialists before ordering.
Related Modules products
Schneider Electric
STBACI1225
The Schneider Electric STBACI1225 is a STB Basic Analog Input Module - 4..20 mA - 2 I - 10 bit, part of the Schneider Electric Modules range. PLC Supply supplies the STBACI1225 new, refurbished or tested used. Ships Australia-wide and worldwide, bench-tested with a 1-year warranty.
In stock
Schneider Electric
STBDDO3600
The Schneider Electric STBDDO3600 is a STB Standard Digital Output Module - 24V DC - 6O, part of the Schneider Electric Modules range. It offers a 24 V DC supply.
In stock
Schneider Electric
TMC2CONV01
The Schneider Electric TMC2CONV01 is a cartridge M221 - conveying 1 serial line - I/O extension, part of the Schneider Electric Modules range. PLC Supply supplies the TMC2CONV01 new, refurbished or tested used. Ships Australia-wide and worldwide, bench-tested with a 1-year warranty.
In stock
Schneider Electric
TM2AMI2LT
The Schneider Electric TM2AMI2LT is an Analog input module M238 - 2 inputs thermocouple low level -, part of the Schneider Electric Modules range. PLC Supply supplies the TM2AMI2LT new, refurbished or tested used. Ships Australia-wide and worldwide, bench-tested with a 1-year warranty.
In stock
Schneider Electric
BMXFCC201
The Schneider Electric BMXFCC201 is a cord set - 40-way terminal - 1 x HE10 connector - for M340 I/O, part of the Schneider Electric Modules range. PLC Supply supplies the BMXFCC201 new, refurbished or tested used. Ships Australia-wide and worldwide, bench-tested with a 1-year warranty.
In stock
Schneider Electric
TWDDDO16TK
The Schneider Electric TWDDDO16TK is a discrete output module Twido - 16 outputs - solid state, part of the Schneider Electric Modules range. PLC Supply supplies the TWDDDO16TK new, refurbished or tested used. Ships Australia-wide and worldwide, bench-tested with a 1-year warranty.
In stock
Schneider Electric
EMS59151
The Schneider Electric EMS59151 is a Head unit communication gateway, part of the Schneider Electric Modules range. It offers a 48 V DC supply, Modbus connectivity and DIN rail mounting.
In stock
Schneider Electric
BMXFTW308S
The Schneider Electric BMXFTW308S is a shielded cord set - 28 ways terminal - one end flying leads -, part of the Schneider Electric Modules range. PLC Supply supplies the BMXFTW308S new, refurbished or tested used. Ships Australia-wide and worldwide, bench-tested with a 1-year warranty.
In stock
Ready to order LX1G3QKUEN?
Get pricing, condition and lead time — usually within hours.
Request a quote